ecom®

Diagnosis made easy!

Read-Out Head For Firing Automats: ecom-AK!

With a little help straight to the target –
failure diagnosis with the ecom-AK turns into an easy job.

Any experienced heating service engineer knows this phenomenon: just right in the heating period a customer burner fails again and again – the cause is unknown. Often the possible cause suspected first is not the matching one. Sometimes several checks at the plant as well as the in- volvement of the manufacturer customer service assistance are necessary to finally get the plant back to proper function.

On the other side a small instrument is able to:

  • show the operation stand of a burner
  • measure the flame signal and to compare it with the minimal value
  • check if the flame spontaneously flares up or with some delay
  • display current as well as previous trouble sources
  • determine the number of burner starts
  • reproduce all relevant monitoring times (safety time, etc.)

The read-out head ecom-AK offers all these diagnosis possibilities for all current digital firing automats (Honeywell-Satronic DKG, DKO, DKW, DMO, DMG, DLG, DVI, DIO and SK as well as Siemens-Landis & Staefa LMG, LMO) and -thanks to the integral display- can be operated alone or (then with further functions) in combination with an ecom-EN2 resp. ecom-J2KN / J2KNpro flue gas analyser.

The ecom-AK enables the targeted diagnosis of fault sources and their sustainable trouble-shooting. In the end – and especially during the cold season – a heating system should run permanently and this trouble-free.

Inquiry

Data sheet
Kinderleicht

ecom-AK
Read-out head for firing automats - with radio transfer

For burner diagnosis/indication of the main monitoring times of the firing automat on its display as described above.
Additionally wireless data transfer to the flue gas analyser ecom-J2KN(pro) for graphical indication of the operation stands of the burner, documentation of error history as well as all important monitoring times of the firing automats.

Power supply: 2 accus type AA 1.2V or 2 one-way batteries type AA 1.5 V.
Power consumption: approx. 100 mA.
Storage temperature: -20°C to +50°C Operation temperature: -20°C to +50°C.
Dimensions: approx. 88 x 41 x 32 mm Weight: approx. 150 g (with batteries)
Delivered in protection bag with 2 one-way batteries

Item No. 6006000

ecom-AK
Read-out head for firing automats

For burner diagnosis/indication of the main monitoring times of the firing automat on its display as described above.
Additionally data transfer per wire to the flue gas analyser ecom-EN2(R) for graphical indication of the operation stands of the burner, documentation of error history as well as all important monitoring times of the firing automats.

Power supply: 2 accus type AA 1.2V or 2 one-way batteries type AA 1.5 V.
Power consumption: approx. 100 mA.
Storage temperature: -20°C to +50°C Operation temperature: -20°C to +50°C.
Dimensions: approx. 88 x 41 x 32 mm Weight: approx. 150 g (with batteries)
Delivered in protection bag with 2 one-way batteries

Item No. 6006010

ecom-AK