ecom-EN
.jpg)
• Automatic overload protection
for CO sensor
• Connection for gas pressure sensor
and gas leak detector
• Condensate trap with safety shut-down
• 4000 measurements recordable
• Display individually adjustable
With the ecom-EN it is possible to determine the most important condition variables in combustion processes for standard fuels. Thanks to the compact design and simple, menu-guided operation, the device is ideal for the fast checking and setting of low-power combustion installations. The ecom-EN is equipped with an integrated
printer and a measured value memory for up to 4000 measurements.
With the help of the free PC software ENDV customer or plant data can also be transferred into the device. These data can be retrieved on site to provide an absolutely clear record of the measuring results. Then the results stored can be backed up in a file and archived simply by ENDV. In addition the equipment includes a gas heat exchanger and an electronic condensate monitor to provide reliable preparation of the measuring gas. Connection facilities for a GSK gas detector and PC are standard. The compact ecom-EN, equipped with state-of-the-art technology, combines the technical benefits and sturdiness of a measuring case with the comfortable mobility of a hand-held device.
With the integrated protocol printer the measuring results obtained can be documented immediately. The printout can be individualized with the user address (8 x 24 characters).
Automatic overload protection for CO sensor
The CO sensor is safeguarded from overload by an internal protection program. Above a limit of 4000 ppm a flushing pump is switched on to supply fresh air to the sensor. The measurements can be resumed without problem during the few seconds up to the automatic re-connection.
Condensate trap with safety shut-down
The ecom-EN is equipped with a gas heat exchanger and an electronic condensate monitor for safe measuring gas preparation. Specially formed contact pins in the filling level monitoring facility prevent the ingress of moisture in any operating position of the device.
Connection of gas pressure sensor and gas leak detectorHelpful accessories, such as external gas pressure sensors or the gas detector, expand the possibilities. The accessories can be connected quite simply to the integrated sockets of the peripheral units.
Equipment ecom-EN
Measuring variablesO2; CO; (NO as option); T-Gas; T-Air; differential pressure
Calculation variablesCO2; CO(U); efficiency; losses; lambda; dew point; mg/m3; mg/kWh; O2 reference
DisplayLCD display; 70 x 40 mm; max. 8 lines
Back-lit; graphic-capable
ProbeCoaxial probe 220 mm with triple-chamber hose 2.20 m
Preparation of measuring gas
Quick gas transport (measuring values quickly available)
Condensate trap with fine-particle filter
Electronic condensate monitor
Safety
Temperature trend indication to locate core flow
CO shut-down without interruption of measurement
Fresh air flushing in the case of CO overload
Fresh air flushing after measuring operation
PrinterThermal printer 58 mm
Connections
GSK connection, gas pressure sensor connection
Serial interface for data transfer
Data processing
Internal memory (4000 measured values)
Data exchange with PC program (option)
Transport
Transport bag (option)
Transport case (option)
Dimensions/WeightDimensions (W x H x D): 190 x 160 x 75 mm
Weight: approx. 3.5 kg complete with sampling system
